Durafly Auto-G2 Gyrocopter w/Auto-Start System 821mm (PNF)
Available here :
A new take on one of Durafly’s most beloved models!
The Durafly Auto-G took the R/C world by storm, being the first and only “Plug and Fly” R/C autogyro in the history of the hobby. With the new Auto-G2, Durafly has raised the bar yet again by building on the unique flying experience that the original Auto-G brought to the world, with innovations that make the best, better.
The main feature of the Auto-G2 setting it apart from the original is the all new Auto-Start system. This device spins up the rotor head automatically with the flip of a switch on your transmitter. This eliminates the unwanted torque effect that is created when an ordinary autogyro’s unpowered rotor head gets up to speed during take-off. The Auto-Start system makes ROG take-offs and hand launches easier than ever before! We’ve also added a steerable, shock-absorbing tail wheel to improve ground handling, as well as an all new color scheme offering better visual orientation in flight.
The pre-installed Auto-Start system is very easy to use. It gets its power from your battery’s balance plug and is operated by a spare channel on your transmitter. Simply flip a switch to turn the system on/off. It’s connected to the main rotor head by a flex shaft and one-way bearing system allowing the rotor head to spin freely when the power is switched off. This Auto-Start system is ideal for use with ROG take-offs, hand launches and can even be engaged during flight to assist with pin-point landings.
For those of you looking for a new flying experience, the Auto-G2 is just the ticket. This model will be especially appealing to those who fly both helicopters and fixed wing aircraft, as this model falls somewhere in between. With its very unique flight characteristics, the Auto-G2 is by far one of the most interesting models we have ever flown. In addition to its super slow flight and auto-rotation capability, it can even perform aerobatics such as stall turns and loops!
The Auto-G2 fuselage and tail are constructed from ultra durable EPO foam, while the tail boom is made from lightweight carbon fiber. This model is super easy to assemble with its pre-installed electronics, bolt on horizontal stab, pre-fitted servo linkages and push-in landing gear. The only part on this model that requires gluing is the vertical stabilizer. This means you can have your Auto-G2 in the air in as little as 15 minutes!
• All new Auto-Start System
• Tough EPO Construction
• Fast and Easy Assembly
• Strong, Impact Resistant Rotor Blades
• Steerable Tailwheel
• Power System and Servos Pre-Installed
• Simple, Low Parts Count Design
• Unique Flying Experience
Rotor Diameter: 821mm
Servo: 9g x 4
Motor: 800KV brushless outrunner
Your own 5CH (or more) transmitter and receiver
1300mAh 3S lipoly battery